Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
It's about 25,000 after the factory records end in 1906, so my best guess would be 1910-1912. Marlinman93 will probably be able to narrow that done a little finer.
Nice gun.
Dont have Brophys book next to me but I found this that indicates it was made before 1913.
Medium Action:
Model 1893: 1893 to 1921 or 22. PAT'D OCT. 11,1887. APRIL2.1889. AUG. 1, 1893
25-36, 30-30, 32-40 32HPS, 38-55
Some early 1893's did not have the two piece firing pin. Serial numbers are located under the receiver just behind the forearm.
Factory records ceased in 1906. Original serial numbering quit around 450,000 approx 1913. Letter designations used on 1893 during the following period were A, B, C, & D. This goes to about the 1917 WWI period. ???A=1914, B=1915, C=1916, D=1917???
Note: some 1893s were made after WWI when production of the '93 started. These were apparently made up from left over parts. 32HPS is the same cartridge as the 32 Winchester Special. Marlin didn't want to put the name Winchester on it's rifles.
Situations like this is where a Curio and Relic collectors license comes in real handy. No waiting period to take delivery and arms can be sent directly to your home.
I considered a C&R when I got my Win M52 a few months back.
The goal is to just get a few rifles and shoot them alot before I
start getting more guns, so I decided I could deal with the wait.
Had to give up my 17 guns back in 2003 and am starting over
this year, to date:
To go with the 22's I picked up an unfired Iver Johnson Super Sealed 8
revolver. I will need a 357 also, but need to get mom a decent revolver
first (she moved out to the desert).
If I remember correctly 1893 marlin TDs have no adjustments to tighten the barrel assembly as the Winchesters do. That is the reason you see the dents on most TD Marlins around the spacer (I'm not for sure what it is called) that you fold down after screwing in the barrel. People would tap it in with a hammer to make it tighten up. If you used a rubber or brass mallet and be careful it works fine but will shoot loose after a while because of the recoil, if it is a high caliber rifle. Marlinman will know better than me, but I think I'm right.