Thinking of a rechamber for my vintage marlin.
I would like to know in detail what is required as far as tools and anything else.
Thanks,
Jay
30-30 AI rechamber
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
30-30 AI rechamber
KI6WZU
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
Re: 30-30 AI rechamber
You just need a barrel vise to remove the barrel and put it back on . A chamber reamer and head space gauges .
I will say most guys (that I've talked to) that do barrels say swapping out or removing and putting barrels on lever guns is a little more tricky then a bolt action as you "can" torque the action if you're not carefull .
I will say most guys (that I've talked to) that do barrels say swapping out or removing and putting barrels on lever guns is a little more tricky then a bolt action as you "can" torque the action if you're not carefull .
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
Re: 30-30 AI rechamber
If I did one I would not remove the barrel. Take the bolt out and ream it by hand. Take it slow , use cutting oil , flush frequently. Lightly polish chamber when done.
Re: 30-30 AI rechamber
What BenT said.