STEVENS 425 HIGH POWER
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Re: STEVENS 425 HIGH POWER
just returned from a show where I bought a rough Stevens 425 parts gun. Had never seen one so I googled and found this thread.
gun is marked 30-30 Rem and the serial is 3996 marked on the lower tang under the lever. Hope this helps.
Is this chambered for the 30 Rem rimless?
CAB
gun is marked 30-30 Rem and the serial is 3996 marked on the lower tang under the lever. Hope this helps.
Is this chambered for the 30 Rem rimless?
CAB
Re: STEVENS 425 HIGH POWER
I have #3996 in 30 Rem. It is missing the wood, sights, magazine spring and cap. There are replacement stocks available but the price is $135. I am looking for someone who has a good stock and is willing to trace it or photograph it on graph paper as well as measure the stock. With a graphed tracing and measurements along with the photos I already have, I can make a stock. I only need the surface measurements as the inletting is simply governed by the reciever.
CAB
CAB
- Doc.Holliday
- Levergunner 1.0
- Posts: 50
- Joined: Tue Aug 23, 2011 7:11 pm
Re: STEVENS 425 HIGH POWER
I inherited one in 35 remington about 15 years ago . I think I know gave you the serial # on another site.
I seen 2 others for sale in Canada web sites
in the last year; both in the same 35 Remington.
A store called Arc-Inter in Montreal Quebec I believe had the last one for $600.00 on their web site. It sold fast I was going to call but I figured maybe they only spoke french and lately I've been frustrated enough!
The one I inherited from my Great Uncle i'm pretty sure He bought it used in the 1940's.
I shot a 12 point whitetail with it in 1999 and haven't shot it since. I'm afraid if something should fail it cannot be fixed for no parts.
Good memories ; thanks
Doc.
I seen 2 others for sale in Canada web sites
in the last year; both in the same 35 Remington.
A store called Arc-Inter in Montreal Quebec I believe had the last one for $600.00 on their web site. It sold fast I was going to call but I figured maybe they only spoke french and lately I've been frustrated enough!
The one I inherited from my Great Uncle i'm pretty sure He bought it used in the 1940's.
I shot a 12 point whitetail with it in 1999 and haven't shot it since. I'm afraid if something should fail it cannot be fixed for no parts.
Good memories ; thanks
Doc.
“Doc was a dentist whom necessity had made a gambler; a philosopher whom life had made a caustic wit; a long, lean, ash-blond fellow nearly dead from consumption, at the same time the most skilful gambler and the nerviest, speediest, deadliest man with a six-gun I ever knew.”
Wyatt Earp: San Francisco Examiner-August 2,1896
Wyatt Earp: San Francisco Examiner-August 2,1896
- Doc.Holliday
- Levergunner 1.0
- Posts: 50
- Joined: Tue Aug 23, 2011 7:11 pm
Re: STEVENS 425 HIGH POWER
I should tell you in case you have miss-placed my serial # that is is in the 4000 to 4400 range.
I have never seen or seen for sale the higher grades in any caliber.
Doc.
I have never seen or seen for sale the higher grades in any caliber.
Doc.
“Doc was a dentist whom necessity had made a gambler; a philosopher whom life had made a caustic wit; a long, lean, ash-blond fellow nearly dead from consumption, at the same time the most skilful gambler and the nerviest, speediest, deadliest man with a six-gun I ever knew.”
Wyatt Earp: San Francisco Examiner-August 2,1896
Wyatt Earp: San Francisco Examiner-August 2,1896
Re: STEVENS 425 HIGH POWER
what he saidearlmck wrote:I can't believe it. Starting page 3 of an interesting thread and not a single picture .
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: STEVENS 425 HIGH POWER
will get mine out and take pictures tonightbulldog1935 wrote:what he saidearlmck wrote:I can't believe it. Starting page 3 of an interesting thread and not a single picture .
serial # 3234 in 25 remington
cable
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: STEVENS 425 HIGH POWER
here is picture of my stevens 425, serial # 3234, in 25 remington caliber:
waiting to get some properly headstamped brass and will try it out soon, i hope.
waiting to get some properly headstamped brass and will try it out soon, i hope.
cable
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: STEVENS 425 HIGH POWER
HFCable that's a nice looking rifle. What loads have shot in it? What is its value? Assuming it would be up there a ways. It is surprising that rifle didn't sell better or be more popular.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: STEVENS 425 HIGH POWER
they often bring quite a bit, but i got this one in an odd sort of auction last year for just over 300$
the loads are balistically the same as 25/35 but i have got to get some ammo loaded, as the weather is finally ready for shooting gain
the loads are balistically the same as 25/35 but i have got to get some ammo loaded, as the weather is finally ready for shooting gain
cable
- earlmck
- Advanced Levergunner
- Posts: 3453
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: STEVENS 425 HIGH POWER
Thanks for the picture, cable. That is a fine looking rifle. Lots of character: I'd like to have one just like it. I have a couple of Remington model 14's in the 25 Remington, and would say it is closer to a 25/35 Improved in powder capacity. I've been making mine out of 30 Remington brass which Remington made a nice run of last year. I like to take them gently down to 25 via an intermediate 7mm step (I have a handy 7/08 die) but you would probably be OK going direct to the 25.
Thanks to fellow levergunner Bill in Oregon I have a few correctly headstamped 25 Rems but unless some rare event happens I suspect most of my 25 Rems will always have the 30 Rem stamp on them. At least that is a big enough difference to be visually obvious
Thanks to fellow levergunner Bill in Oregon I have a few correctly headstamped 25 Rems but unless some rare event happens I suspect most of my 25 Rems will always have the 30 Rem stamp on them. At least that is a big enough difference to be visually obvious
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: STEVENS 425 HIGH POWER
thanks for the info! i believe i will enjoy this little rifle. i have some properly headstamped cases on back order [ i have so many different calibers, i want to be sure i am picking up the right stuff ]earlmck wrote:Thanks for the picture, cable. That is a fine looking rifle. Lots of character: I'd like to have one just like it. I have a couple of Remington model 14's in the 25 Remington, and would say it is closer to a 25/35 Improved in powder capacity. I've been making mine out of 30 Remington brass which Remington made a nice run of last year. I like to take them gently down to 25 via an intermediate 7mm step (I have a handy 7/08 die) but you would probably be OK going direct to the 25.
Thanks to fellow levergunner Bill in Oregon I have a few correctly headstamped 25 Rems but unless some rare event happens I suspect most of my 25 Rems will always have the 30 Rem stamp on them. At least that is a big enough difference to be visually obvious
now i just have to find a tang sight for it!
cable
-
- Levergunner
- Posts: 39
- Joined: Fri Nov 14, 2008 6:50 pm
- Location: California
Re: STEVENS 425 HIGH POWER
NEW UPDATE:
We now have 184 Stevens High Power rifles on our list. The highest serial number is still 5594 and the lowest is still 1021.
The most popular caliber is .30 Rem with 70 guns, followed by .35 Rem with 60 guns. Then comes .25 Rem with 23 guns and .32 Rem with 21 guns. (We have 2 guns with unknown calibers.)
We have found only a couple of the fancier versions of the 425 High Power, but their serial numbers are not different from the standard rifles. One very interesting version has been found. It is a Stevens 425 High Power Saddle Ring Carbine, it's marked 425-C on the barrel, and it has a full length magazine with two barrel bands. I've never seen another one. Has anyone??
Peter Zobian
NRA Life Member
We now have 184 Stevens High Power rifles on our list. The highest serial number is still 5594 and the lowest is still 1021.
The most popular caliber is .30 Rem with 70 guns, followed by .35 Rem with 60 guns. Then comes .25 Rem with 23 guns and .32 Rem with 21 guns. (We have 2 guns with unknown calibers.)
We have found only a couple of the fancier versions of the 425 High Power, but their serial numbers are not different from the standard rifles. One very interesting version has been found. It is a Stevens 425 High Power Saddle Ring Carbine, it's marked 425-C on the barrel, and it has a full length magazine with two barrel bands. I've never seen another one. Has anyone??
Peter Zobian
NRA Life Member
Re: STEVENS 425 HIGH POWER
hi
I got a Steven hi power 425 with the serial#1102 today for $100.- in a very nice condition like the pictures you see up here at this page.
I have shot this rifle some years ago and this year my friend like to sell this one.nice Christmas gift for me.
nice Forum all a very nice merry Christmas and a happy new year from canada
Benben
I got a Steven hi power 425 with the serial#1102 today for $100.- in a very nice condition like the pictures you see up here at this page.
I have shot this rifle some years ago and this year my friend like to sell this one.nice Christmas gift for me.
nice Forum all a very nice merry Christmas and a happy new year from canada
Benben
-
- Levergunner
- Posts: 39
- Joined: Fri Nov 14, 2008 6:50 pm
- Location: California
Re: STEVENS 425 HIGH POWER
What is the caliber??benben wrote:hi
I got a Steven hi power 425 with the serial#1102 today for $100.- in a very nice condition like the pictures you see up here at this page.
I have shot this rifle some years ago and this year my friend like to sell this one.nice Christmas gift for me.
nice Forum all a very nice merry Christmas and a happy new year from canada
Benben
Peter Zobian
NRA Life Member
Re: STEVENS 425 HIGH POWER
hello
sorry forget the caliber.
it is Remington .35
sorry forget the caliber.
it is Remington .35
-
- Levergunner 2.0
- Posts: 173
- Joined: Tue Sep 25, 2007 5:33 pm
- Location: Blue Ridge, Va
Re: STEVENS 425 HIGH POWER
mine is ser 3188 in 30 rem just got brass so i hope to shoot soon as released from doc. later, mh
-
- Levergunner
- Posts: 39
- Joined: Fri Nov 14, 2008 6:50 pm
- Location: California
Re: STEVENS 425 HIGH POWER
Here's a photo of my Stevens High Power Saddle Ring Carbine, Model 425-C, serial #4076. Note the full length magazine and the barrel bands. This is the only such gun on our list. has anyone seen another?
You do not have the required permissions to view the files attached to this post.
- Sixgun
- Posting leader...
- Posts: 18799
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: STEVENS 425 HIGH POWER
Take a picture of it with you holding it in your hands.
I am amazed that a post made 6 years ago is still in cyber holdings.----6
I am amazed that a post made 6 years ago is still in cyber holdings.----6
- Griff
- Posting leader...
- Posts: 20884
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: STEVENS 425 HIGH POWER
Take from the right side... I love the wood on that carbine!Sixgun wrote:Take a picture of it with you holding it in your hands.vintageautomobilia wrote:Here's a photo of my Stevens High Power Saddle Ring Carbine, Model 425-C, serial #4076. Note the full length magazine and the barrel bands. This is the only such gun on our list. has anyone seen another?
I would probably just look at one of those and pass it on by, as I'm not a big fan of Marlins... and rarely fondle one in a gunshop.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: STEVENS 425 HIGH POWER
and people often comment that the stevens High Power looks like the marlin.......when really it is the other way around. the marlin of that time period is the square bolt 93.....this stevens looks like the later marlin 336, many years later. if any copy catting was done it was marlin that did it.Griff wrote:Take from the right side... I love the wood on that carbine!Sixgun wrote:Take a picture of it with you holding it in your hands.vintageautomobilia wrote:Here's a photo of my Stevens High Power Saddle Ring Carbine, Model 425-C, serial #4076. Note the full length magazine and the barrel bands. This is the only such gun on our list. has anyone seen another?
I would probably just look at one of those and pass it on by, as I'm not a big fan of Marlins... and rarely fondle one in a gunshop.
of course, i do like marlines and i really like almost all the lever guns, and my accumulation [ hard to call it a collection ] has the aim of having an example of most of the major types. not one of each caliber of each model, but just a representative example [ including reproductions for those unaffordable otherwise] of most of the common major developments. and an example of most of the lever action 22 rim fires in particular.
cable
Re: STEVENS 425 HIGH POWER
Classic looking rifle. I didn't know about them. Thanks for sharing
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
-
- Levergunner
- Posts: 39
- Joined: Fri Nov 14, 2008 6:50 pm
- Location: California
Re: STEVENS 425 HIGH POWER
Here are photos of the right side of my Stevens 425-C Saddle Ring Carbine, and also a photo of the front sight and barrel band, plus photos of the maker's mark and model mark.
You do not have the required permissions to view the files attached to this post.
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: STEVENS 425 HIGH POWER
that is really a very fine gun ! jealous !
love those sights, especially the rear sight !
love those sights, especially the rear sight !
cable
Re: STEVENS 425 HIGH POWER
CAB can I get a hammer spring from your parts gun?
Re: STEVENS 425 HIGH POWER
Hi, just registered as I'm trying to learn a bit about this rifle that just came into my posession. Thought I would post its a Stevens 425 high power nickel steel in .25 remington. Serial #2109. End of the hammer is broken off. Light surface rust, stock is probably a 6/10. Seems to function well. Looking to sell, might try and find a hammer and reblue if that would increase the value. Thoughts? Value?
-
- Levergunner 2.0
- Posts: 477
- Joined: Fri Sep 21, 2007 11:25 am
- Location: NE Ohio
Re: STEVENS 425 HIGH POWER
There could be another reason no numbers are above the 5XXX range. Stevens may have just reused numbers ie: started back at number 1 once 5XXX was reached. They did this with their Stevens Favorite single shot of which they made a LOT, I come across 2 or 3 digit Favorites guns all the time. I even owned number 01 at one point (32 rimfire). I didn't see any numbers repeat in your survey, but you may need more data to statistically say there are no repetitions. Just my 2 cents
"...for there is a cloud on my horizon...and its name is progress." E. Abbey, 1958
Re: STEVENS 425 HIGH POWER
I have #1804 in 30-30.
- AmBraCol
- Webservant
- Posts: 3666
- Joined: Fri Mar 30, 2007 8:12 am
- Location: The Center of God's Grace
- Contact:
Re: STEVENS 425 HIGH POWER
Talk about a blast from the past. Welcome to the forum!
Paul - in Pereira
"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon
http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon
http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
- rock-steady
- Levergunner 2.0
- Posts: 428
- Joined: Tue Dec 18, 2007 7:35 am
- Location: Deplorable Red State
Re: STEVENS 425 HIGH POWER
Guns International lists one Stevens 425 for sale...I don't see a serial number in the pictures.
https://www.gunsinternational.com/guns- ... =101819345
Price: $1,999.00
Curio/Relic: Yes
Rifle Caliber: .35 Remington
Manufacturer: Stevens
Model: High Power 425
Barrel Length: 22
Condition: good
Metal Condition: good
Wood Condition: good
Bore Condition: shiny with good rifling
https://www.gunsinternational.com/guns- ... =101819345
Price: $1,999.00
Curio/Relic: Yes
Rifle Caliber: .35 Remington
Manufacturer: Stevens
Model: High Power 425
Barrel Length: 22
Condition: good
Metal Condition: good
Wood Condition: good
Bore Condition: shiny with good rifling
"People who need long explanations at moments when everything depends on instinct have always irritated me." ~ Guy Sajer
Re: STEVENS 425 HIGH POWER
Thanks for the welcome. I’ve had my 425 for 30 years. It’s in very good condition. Looking forward to getting to know the folks on the forum,