OK, all you experts,
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
jnyork
- Advanced Levergunner
- Posts: 4470
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
OK, all you experts,
I have two older rifles that I shoot quite a bit and were shot quite a bit before I got them. In both, there is some whiteish deposit or something in the grooves of the rifleing. It aint lead. They wont budge regardless of what I do, JB wont touch 'em, same for Flitz, same for Sweets, etc. What is this, is it some sort of corrosion or what? Thanks
- J Miller
- Member Emeritus
- Posts: 14906
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
jnyork,
I believe it is a corrosion of some sort, or at least some form of chemical reaction between the bullet metal and the barrel steel. I've seen this on 30 cal rifles I've bought used that have been fired, cleaned and put away for a long time.
The only way I've gotten rid of it is to scrub the bore with a tight fitting bronze brush saturated with Hoppes and then turning the gun muzzle down and let it soak over night.
I've never had it interfere with the accuracy of my rifles, but I don't like it either.
Joe
I believe it is a corrosion of some sort, or at least some form of chemical reaction between the bullet metal and the barrel steel. I've seen this on 30 cal rifles I've bought used that have been fired, cleaned and put away for a long time.
The only way I've gotten rid of it is to scrub the bore with a tight fitting bronze brush saturated with Hoppes and then turning the gun muzzle down and let it soak over night.
I've never had it interfere with the accuracy of my rifles, but I don't like it either.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts
.***
I've seen that one time because I used, improperly used, an ammonia based copper fouling cleaner. Using one of the foaming cleaners removed it.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
- Old Time Hunter
- Advanced Levergunner
- Posts: 2388
- Joined: Sun Apr 01, 2007 11:18 am
- Location: Wisconsin
Hobie, I've seen it too. Only the ammonia based cleaner was Windex. It was used on a old Milsurp(an original Lee-Enfield) that had only been fired with corrosive ammo with cordite propellent. After using modern smokeless a few times and cleaning it out with that "blue magic" stuff, it started to look normal.
Does it affect the accuracy? Brasso is a remarkable bore cleaner. It's an old Marine trick.
"I have reached up to the gun rack and taken down the .30/30 carbine by some process of natural selection, not condoned perhaps by many experts but easily explained by those who spend long periods in the wilderness areas."~Calvin Rutstrum~
"You come to the swamp, you better leave your skirt at the house"~Dave Canterbury~
"You come to the swamp, you better leave your skirt at the house"~Dave Canterbury~
-
Jaguarundi
- Senior Levergunner
- Posts: 1804
- Joined: Tue Feb 19, 2008 3:27 am
- Location: Wiregrass Area,Alabama