New in AZ

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
SchwartzStock
Levergunner
Posts: 1
Joined: Fri Feb 15, 2013 9:50 am

New in AZ

Post by SchwartzStock »

Good morning. Just found the sight this morning. Rec'd a rebuilt Marlin 1894 in 44 mag last night that has a slight problem. The rifle has an older (1920's?) barrel on it that looks to be rust blued while the action has been CC'd. Anyway, the slight problem is that the lever does not lock good when a round is chambered or the breech closed on an empty chamber. I'm thinking the spring fo rhte plunger on the lever is weakened. Any other things I need to check?

SS.
Top
User avatar
gamekeeper
Spambot Zapper
Posts: 17487
Joined: Thu Sep 06, 2007 3:32 pm
Location: Over the pond unfortunately.

Re: New in AZ

Post by gamekeeper »

Welcome to the fire... I'm sure a Marlin expert will chip in soon.... :wink:
Whatever you do always give 100%........... unless you are donating blood.
Top
JerryB
Advanced Levergunner
Posts: 5493
Joined: Mon Apr 02, 2007 9:23 pm
Location: Batesville,Arkansas

Re: New in AZ

Post by JerryB »

Welcome to the best gun site around.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.

JOSHUA 24:15
Top
User avatar
Blaine
Posting leader...
Posts: 30496
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: New in AZ

Post by Blaine »

Greetings....
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Top
User avatar
2ndovc
Advanced Levergunner
Posts: 9363
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: New in AZ

Post by 2ndovc »

Sounds interesting. Are you sure it's a .44 Magnum and not a .44-40/ .44WCF?

May need a chamber cast.

jb 8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
Top
User avatar
AJMD429
Posting leader...
Posts: 32294
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:
Contact AJMD429

Re: New in AZ

Post by AJMD429 »

My 1894css did that and it turned out to be the extractor was pushing on the outside of the barrel and making the bolt want to push back. I was going to 'fix' it, but once I realized the cause I decided I'd rather have a strong extractor spring and didn't bother. I suppose a bit of reshaping of the nose would have helped but again, I didn't bother.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.

Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Top
LAW483
Levergunner
Posts: 17
Joined: Mon Feb 11, 2013 3:45 pm
Location: Willow Park TX, DFW Area
Contact:
Contact LAW483

Re: New in AZ

Post by LAW483 »

Welcome!
Top
User avatar
Ysabel Kid
Moderator
Posts: 27918
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:
Contact Ysabel Kid

Re: New in AZ

Post by Ysabel Kid »

Welcome aboard! :D
Image
Top
User avatar
wfo
Levergunner 1.0
Posts: 57
Joined: Sat Dec 15, 2012 8:21 pm
Location: Texas

Re: New in AZ

Post by wfo »

Welcome from the Texas Panhandle.
We the people are the Rightful Masters of both Congress and the Courts. Not to overthrow The Constitution but to overthrow the men who pervert The Constitution.

Abraham Lincoln
Top
pneuby
Levergunner 1.0
Posts: 78
Joined: Sun Sep 18, 2011 10:44 pm

Re: New in AZ

Post by pneuby »

Welcome from your Phoenix neighbor. 8)
Top
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: New in AZ

Post by pwl44m »

Welcome, enjoy.
Perry
Perry in Bangor----++++===Calif
Top
User avatar
Griff
Posting leader...
Posts: 20877
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: New in AZ

Post by Griff »

Image and Welcome to THE Forum. Re-barreled, or re-bored? The .44Mag wasn't produced until the 1950's, and wasn't chambered in the 1894 until well later. But, whether someone re-chambered or put a new barrel on your rifle, that shouldn't have anything to do with your issue. The only 1894 I have is in the process of being rebuilt, but it's lever is tight from the time it starts to enter the receiver on into full lockup.

Have you checked to see if the floorplate screws are tight?
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Top
User avatar
olyinaz
Advanced Levergunner
Posts: 3978
Joined: Sat Nov 28, 2009 2:19 pm
Location: Tucson, AZ

Re: New in AZ

Post by olyinaz »

Welcome aboard!
Cheers,
Oly

I hope and pray someday the world will learn
That fires we don't put out will bigger burn

Johnny Wright
Top
jnyork
Advanced Levergunner
Posts: 4429
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Re: New in AZ

Post by jnyork »

Welcome from Yuma.
Top
Post Reply

Return to “General Discussion”