OT - Winchester 12, replacement stock

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
Old Shatterhand
Levergunner 2.0
Posts: 292
Joined: Thu Sep 13, 2007 3:52 pm
Location: Nericia, Sweden

OT - Winchester 12, replacement stock

Post by Old Shatterhand »

Do you know where to find a replacement stock for a Winchester 1912 in cal. 16? I have searched at Brownells, Midway Sweden, Boyd's and Numrich.

I found the gun last week, and consider buying it, as the metal seem to be in good shape. However, somone has changed the original stock to a horrid fire log, and I would prefer to put an original stock on it, as I like Winchester's stock measurements. In fact, I do not want it with that log. :?

Awful stock, isn't it?
Image


Regards,

Old Sh.
Top
User avatar
gamekeeper
Spambot Zapper
Posts: 18317
Joined: Thu Sep 06, 2007 3:32 pm
Location: Englandistan twinned with Palestine

Post by gamekeeper »

Ouch :!: :shock:
Whatever you do always give 100%........... unless you are donating blood.
Top
User avatar
gamekeeper
Spambot Zapper
Posts: 18317
Joined: Thu Sep 06, 2007 3:32 pm
Location: Englandistan twinned with Palestine

Post by gamekeeper »

Old Shatterhand, If you do a search for 16GA.com there are a few model 12 16GA owners in the 16GA Society and they have a classified section. :wink:
Whatever you do always give 100%........... unless you are donating blood.
Top
User avatar
Old Shatterhand
Levergunner 2.0
Posts: 292
Joined: Thu Sep 13, 2007 3:52 pm
Location: Nericia, Sweden

Post by Old Shatterhand »

game keeper wrote:Old Shatterhand, If you do a search for 16GA.com there are a few model 12 16GA owners in the 16GA Society and they have a classified section. :wink:
Thanks! I'll do a try there. :)

Regards,

old sh.
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Post by Chuck 100 yd »

I think the 16 and 12 ga. guns have the same size reciever and the stocks interchange. The 28ga was built on the 20ga. frame IIRC. Might look into that. :wink:
Top
User avatar
Old Shatterhand
Levergunner 2.0
Posts: 292
Joined: Thu Sep 13, 2007 3:52 pm
Location: Nericia, Sweden

Post by Old Shatterhand »

Chuck 100 yd wrote:I think the 16 and 12 ga. guns have the same size reciever and the stocks interchange. The 28ga was built on the 20ga. frame IIRC. Might look into that. :wink:
That would have been quite fine if it were so, but I have found that 16G and 20g use the same reciever. :(

Regards,

Old Sh.
Top
bobbyjack
Levergunner 2.0
Posts: 110
Joined: Tue Jan 15, 2008 4:20 am
Location: Norman Oklahoma

Post by bobbyjack »

I would think you are talking about the butt plate,right?

And is it a Mod 1912 or a Mod 12?

And the Ithaca Mod 37 and the Winchester mod 12 were really light weight and as easy as they were to carry,they kicked like a bitch!

And many people replaced the hard plastic buttplates with the red rubber ones!

Maybe you just need the origional !

Bob :)
Top
User avatar
Old Shatterhand
Levergunner 2.0
Posts: 292
Joined: Thu Sep 13, 2007 3:52 pm
Location: Nericia, Sweden

Post by Old Shatterhand »

I've found it: http://jeffsoutfitters.com fine site with a lot of interesting stuff.

Thanks for your inputs!

Old Sh.
Top
Post Reply

Return to “General Discussion”