Has anyone used the Brownells blueing called OXPHO-BLUE ? If so how did it turn out , and is it as simple as the master catalog instructions make it sound. Maybe ya'll might describe how you used it ..............
...........................Thanks in advance................Mutt
Question On Blueing
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
Nate Kiowa Jones
- Site Sponsor
- Posts: 2508
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Re: Question On Blueing
I use it for touch up. It's about as good as it get for a cold blue. But, it will never take the place of hot blue.Mutt wrote:Has anyone used the Brownells blueing called OXPHO-BLUE ? If so how did it turn out , and is it as simple as the master catalog instructions make it sound. Maybe ya'll might describe how you used it ..............
...........................Thanks in advance................Mutt
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015

Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015

Re: Question On Blueing
Thanks you sir for the answer.
- Old Savage
- Posting leader...
- Posts: 16949
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: Question On Blueing
SuperBlue produces a color nearer the original to my experience. The oxpho blue paste produced an iridescent lighter blue color with several applications. As you can see it is nothing like the original color.


Last edited by Old Savage on Fri Nov 21, 2008 2:41 am, edited 2 times in total.
Re: Question On Blueing
I've used it to do an entire 95 Mauser that I rebarrelled. I was very impressed with it, for a cold blue. It's the best cold blue available IMO. But like Nate said, it's no hot blue.
NRA Life Member
- marlinman93
- Advanced Levergunner
- Posts: 7064
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Question On Blueing
I use Oxpho Blue a lot, but only the liquid, not the gel. I've reblued barrels, and even whole guns with it, and if properly prepped it will give you a beautiful finish, but as Steve mentioned, it's not as durable as a hot blue. It will give a finish on very old guns that looks closer to the original rust blue than a hot blue finish is.-Vall
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
Re: Question On Blueing
Oxpho is one of the best cold blues, if not the best. Nothing is better for touch-ups. Full-gun reblues are trickier, but you can usually get good results if you stick with it. Regardless of what they say, I've gotten best results after degreasing and slightly warming the metal. Even so, it can take lots and lots of applications, followed by lots and lots of buffing with fine steel wool between applications, before you get something that looks good. Once you get there, though, it is a remarkably durable finish.
- Old Savage
- Posting leader...
- Posts: 16949
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: Question On Blueing
Anyone else have any pictures? i would like to see what you are getting.
