OT - Stock Finish
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- deerwhacker444
- Senior Levergunner
- Posts: 1300
- Joined: Wed Sep 12, 2007 1:12 pm
- Location: Oklahoma
OT - Stock Finish
I'm looking to redo a walnut stock I have. I've got the old finish stripped off and everything is sanded down ready to go. I'd like a deep dark oil finish with something that is easy to get good results with like TruOil, except without the shiny TruOil-Browning wood look. Any ideas on what to use or how to finish this stock?

"If ever a time should come, when vain and aspiring men
shall possess the highest seats in Government,
our country will stand in need of its experienced patriots
to prevent its ruin." Samuel Adams
shall possess the highest seats in Government,
our country will stand in need of its experienced patriots
to prevent its ruin." Samuel Adams
-
mod71alaska
- Senior Levergunner
- Posts: 1925
- Joined: Thu Apr 05, 2007 3:36 pm
- Location: New Hampshire
Re: OT - Stock Finish
DW...
Contact Winchester Restorations for their "Old Winchester Stock Oil."
http://www.winchesterrestoration.com/
Their refinish instructions:
http://www.winchesterrestoration.com/st ... tions.html
Contact Winchester Restorations for their "Old Winchester Stock Oil."
http://www.winchesterrestoration.com/
Their refinish instructions:
http://www.winchesterrestoration.com/st ... tions.html
Re: OT - Stock Finish
Use the Tru-oil until all the pores/grain is filled, then rub the last coat down to remove the gloss with OOOO steel wool pads & wax it with a good paste wax.
I use SIMONIZE NEW CAR WAX, but Johnson's Paste Wax is good, too.
.
I use SIMONIZE NEW CAR WAX, but Johnson's Paste Wax is good, too.
.
-
dr walker
- Senior Levergunner
- Posts: 1194
- Joined: Wed Sep 19, 2007 9:44 am
- Location: southwest Florida
Re: OT - Stock Finish
I have used Birchwood Casey Stock Conditioner (I think that is the name) It is a product that you can put on the glossy Brownings and Remingtons to reduce shine. It works great after about 15 coats of Tru-Oil as well.
- marlinman93
- Advanced Levergunner
- Posts: 7061
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: OT - Stock Finish
I've tried everything I think. The best for a nice hand rubbed oil look was Permalyn Sealer from Brownells, but at $24 for a pint I decided to look around. After several more tries I finally settled on MinnWax Wipe-On Poly.(satin) It gives me the exact finish I wanted, and the results are not only nice, but it covers over almost any previous finish! Some finishes will never dry, or have a reaction to remnants of old finish, but Permalyn and Wipe-On Poly both cover well without that problem.
Since W-OP is extremely thin, it takes a number of coats to do. That also makes it easy to control the sheen. I wet sand the first few coats on, in order to fill the pores with the sanding particles. After wet sanding 3-4 coats, I then just apply it with a rag and wipe the excess off. Sand after each coat dries, and when it gets to looking good I stop.
At the end I hand rub the wood with Behlens Master Finish Rub, which makes a glassy smooth finish that wont be shiny like a Browning. This stock was done with W-OP:

Since W-OP is extremely thin, it takes a number of coats to do. That also makes it easy to control the sheen. I wet sand the first few coats on, in order to fill the pores with the sanding particles. After wet sanding 3-4 coats, I then just apply it with a rag and wipe the excess off. Sand after each coat dries, and when it gets to looking good I stop.
At the end I hand rub the wood with Behlens Master Finish Rub, which makes a glassy smooth finish that wont be shiny like a Browning. This stock was done with W-OP:

Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
- Ysabel Kid
- Moderator
- Posts: 28846
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
- marlinman93
- Advanced Levergunner
- Posts: 7061
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: OT - Stock Finish
Thanks Kid! 
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
