Hi. I own a Winchester 94 model Legacy in 45 Colt and would like to do some hunting with this rifle. I will be re-loading and prefer to use a 250gn hard cast lead projectile. Firstly, what velocities are you guys getting for this weight pill for hunting purposes? And, secondly, will I need to use a gas check?
Cheers
aussie.
45 Colt
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- J Miller
- Member Emeritus
- Posts: 14906
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: 45 Colt
aussie,
With a 250gr bullet you can use a lot of powders, but my two favorites are 9.0grs of Unique and 18.5grs of 2400. Most likely they are in the 1100 to 1300fps range. I say this based on what others have reported as I don't have a chronograph.
At this velocity you won't need any gas checks.
I've loaded up to 300 gr Bullets at 1200 fps from a revolver ( no idea what they come out of a rifle at ) and then shot them from my two rifles with zero leading. As a matter of fact, my rifles will shoot bullets that lead like crazy from my revolvers with no leading at all.
Good luck on your hunt.
Joe
With a 250gr bullet you can use a lot of powders, but my two favorites are 9.0grs of Unique and 18.5grs of 2400. Most likely they are in the 1100 to 1300fps range. I say this based on what others have reported as I don't have a chronograph.
At this velocity you won't need any gas checks.
I've loaded up to 300 gr Bullets at 1200 fps from a revolver ( no idea what they come out of a rifle at ) and then shot them from my two rifles with zero leading. As a matter of fact, my rifles will shoot bullets that lead like crazy from my revolvers with no leading at all.
Good luck on your hunt.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts
.***
- O.S.O.K.
- Advanced Levergunner
- Posts: 5533
- Joined: Sun Apr 27, 2008 4:15 pm
- Location: Deep in the Piney Woods of Mississippi
Re: 45 Colt
Use the load data that is listed for Ruger revolvers. You can easily push that up to 1700+ fps with H110 or W296. I think the top load is 26.5 grains - but check your manual. If the bullet fits the bore (+.001-.002 over bore diameter), a gas check should not be required - just use a good lube - I've found that the best is Lee Liquid Alox (which comes with their excellet bottom-push sizing dies).
I will say that a gas check design will simplify your efforts and will be much more forgiving in the bore. Hornady or Lyman gas checks both work well for me and are applied when I size the bullets in the aforementioned Lee die.
For hunting, I would strongly suggest a proper Keith bullet (which is plain based) - semi wad cutter with square bottom lube grooves and sharp shoulder or one of the LBT wide flat nosed designs - which are gas check types. If you want a gas check semi wadcutter and use the Liquid Alox, then the lube goove design is unimportant and opens up your options for moulds.
I will say that a gas check design will simplify your efforts and will be much more forgiving in the bore. Hornady or Lyman gas checks both work well for me and are applied when I size the bullets in the aforementioned Lee die.
For hunting, I would strongly suggest a proper Keith bullet (which is plain based) - semi wad cutter with square bottom lube grooves and sharp shoulder or one of the LBT wide flat nosed designs - which are gas check types. If you want a gas check semi wadcutter and use the Liquid Alox, then the lube goove design is unimportant and opens up your options for moulds.
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
-
bigbore442001
- Levergunner 3.0
- Posts: 849
- Joined: Sun Dec 09, 2007 12:08 pm
- Location: Southern New England
- Contact:
Re: 45 Colt
What do you plan on hunting?
Re: 45 Colt
Aussie, I load a rnfp 255 hc bullet for hunting and a rnfp 255 cast for practice with 17.8 grs of AA5744 it makes 900 fps in a 71/2" ruger revolver and shoots thru on whitetails.danny