Loading 50AK with 500L dies
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 161
- Joined: Thu Oct 19, 2017 5:39 pm
- Location: N Idaho
Loading 50AK with 500L dies
I know the Lee crimp die will work fine, as the 500 Linebaugh and 50 Alaskan use the same bullets. Wondering if anyone loads and sizes the long cases, with 500 Linebaugh dies.
“YOU CAN’T SHOOT A BIG ONE IF YOU SHOOT A LITTlE ONE FIRST”
- earlmck
- Advanced Levergunner
- Posts: 3425
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: Loading 50AK with 500L dies
I don't have either one of those cartridges but I looked at the dimensional drawings and I can see why you are asking the question. I can see from the drawings that if I had dies for the Linebaugh I would certainly be happily loading the Alaskan as long as I only needed to neck-size. I would worry a bit about oversizing the Alaskan case some if I needed a full-length size but I would try it first before rejecting the idea.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry