DOH !!!
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
DOH !!!
So I bought an Apache gun case from Harbor freight for 2 of my rifles. I spent several hours watching youtube videos on ways to cut foam and how to spray it with Plasti Dip to make the foam more durable and firm. So I carefully traced out my guns and cut them out. Then sprayed the foam adhesive on the back side of the cut foam and meticulously set it in place over the base foam. Perfect! Then proceeded to apply the first coat of Plasti Dip. NOTE TO SELF!!!!!!! DON'T SET THE ADHESIVE CAN AND PLASTI DIP CAN NEXT TO EACH OTHER !!!!! I proceeded to apply a nice coat of adhesive to the foam... DOH!!! So now I just put a couple of decent coats of the Plasti Dip over that in hopes the solvents will bond it all together. I'll let it set for a few hours and see what happens. I respectfully request to nominate myself for the "idiot of the week" award. It will either work out for a better bond, or total destruction of my case foam. If it works out for the best, I'll post a picture to redeem myself. Fingers crossed.
My other wife is a Les Paul Custom
God, Guns, Guitars, and Peanut Butter Pie..... Oh, and I guess the wife.
From my cold, dead, gun powder residue ridden hands.
God, Guns, Guitars, and Peanut Butter Pie..... Oh, and I guess the wife.
From my cold, dead, gun powder residue ridden hands.
Re: DOH !!!
Well, at least the gun wasn't sitting in the foam at the time...
(Gotta look at the bright side. )
Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
Re: DOH !!!
If it turns out well, then nothing to worry about. If not, you can buy some similar foam at a craft store.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
- 2ndovc
- Advanced Levergunner
- Posts: 9323
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: DOH !!!
I thought I was the only one that did that kind of thing!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
- fordwannabe
- Advanced Levergunner
- Posts: 3369
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: DOH !!!
Don’t know about the adhesive and plastic dip combo but I can attest to the plasti dip thing working well.
The top one is my suppressor case before the plasti dip and the second is my inline muzzleloader box after the plasti dip.You do not have the required permissions to view the files attached to this post.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
Re: DOH !!!
Well, I finally finished the case, and 5 coats of Plasti Dip later, I think the crisis is averted. Going to the range today to get my Tikka sighted in, and see how the Henry does with the TriggerShims I put on the lever. Feels real nice without the slop in it.
My other wife is a Les Paul Custom
God, Guns, Guitars, and Peanut Butter Pie..... Oh, and I guess the wife.
From my cold, dead, gun powder residue ridden hands.
God, Guns, Guitars, and Peanut Butter Pie..... Oh, and I guess the wife.
From my cold, dead, gun powder residue ridden hands.