Search found 63 matches
- Fri Feb 14, 2014 12:19 am
- Forum: General Discussion
- Topic: 1873 Winchester information
- Replies: 10
- Views: 3103
Re: 1873 Winchester information
check this first. the frame behind the carrier where the bolt slides is worn and letting the bolt tilt. I have a 73 in 38-40 that had the problem you describe. without a ctg when closing the bolt it would let the extractor fall into the chamber. (badly worn) I thought I needed to do some of the fixe...
- Sat Dec 14, 2013 1:21 am
- Forum: General Discussion
- Topic: Inexpensive Bore scope?
- Replies: 7
- Views: 1158
Re: Inexpensive Bore scope?
Griff, I bought one of those maybe ten years ago. Wayne McLerran offered those I believe. $40. + $3. shipping. this may not be current as I have hade it for a while. Wayne also wrote a book on the Browning Model 1885 Black Powder Cartridge Rifle. that gives research on this gun. Try him at wayne@Tex...
- Thu Dec 05, 2013 11:40 pm
- Forum: General Discussion
- Topic: Extrem Big Bore Air Rifles
- Replies: 15
- Views: 1747
Re: Extrem Big Bore Air Rifles
the 308 filled to 3000psi (recommended psi) is about as loud as a 22lr out of a ruger 10-22. but makes a different sound.
local fire dept's can fill air tanks. some will some won't.
local fire dept's can fill air tanks. some will some won't.
- Wed Dec 04, 2013 9:38 pm
- Forum: General Discussion
- Topic: Extrem Big Bore Air Rifles
- Replies: 15
- Views: 1747
Re: Extrem Big Bore Air Rifles
Howdy TUT Got a DAQ 308 exile earlier this year . he makes them in cal up to 50 I believe. Takes orders of only 50 at a time. all hand made. these use the same bullets you would cast for ctg guns. look him up at Quackenbush big bore air guns. lotsa good info at his web site. be verry verry careful R...
- Fri Nov 29, 2013 11:19 am
- Forum: General Discussion
- Topic: Original 1876 win 45-60 key holing bullets help
- Replies: 18
- Views: 2008
Re: Original 1876 win 45-60 key holing bullets help
largest bullet that will chamber, does not have to be seated longer than factory.
m
m
- Thu Nov 28, 2013 10:18 pm
- Forum: General Discussion
- Topic: Original 1876 win 45-60 key holing bullets help
- Replies: 18
- Views: 2008
Re: Original 1876 win 45-60 key holing bullets help
mgdan, your bullet is too small for the ball seat. (throat). if you don't want to do a throat slug to find out the size you can get larger bullets. to explain with a story. I acquired a marlin model 93 in 32-40. .321 bore. cast and sized bullets to the book. shot them at 25yds at a 1' square steel t...
- Thu Oct 31, 2013 9:52 pm
- Forum: General Discussion
- Topic: Tempering a flat spring....It works!
- Replies: 25
- Views: 3240
Re: Tempering a flat spring....It works!
45 gage piano wire will make that spring and will never break. you can adjust tension as desired.
m
m
- Tue Feb 19, 2013 12:17 am
- Forum: General Discussion
- Topic: Review: Henry Repeating Arms 30-30 H009 and H009B
- Replies: 35
- Views: 29134
Re: Review: Henry Repeating Arms 30-30 H009 and H009B
getting here late I have to say most of my observations have already been discussed. I lean toward the black gun. I am a peepsight guy but this one seemed a little lacking. needs a smaller appature for target work and more adjustment. I am with others on the front sight barrel band. Has a matell toy...
- Sun Feb 17, 2013 9:37 pm
- Forum: General Discussion
- Topic: I need some shooters in Texas ...SUN Feb 17th
- Replies: 59
- Views: 5455
Re: I need some shooters in Texas ...SUN Feb 17th
Great day, Joe thanks for the opportunity to shoot these guns and thanks to Ricky for the place to do it. Weather was great (well except for the wind). Was nice to meet other forum members. This provided us an opportunity to run these guns for accuracy, function and feel and balance. Always nice to ...
- Wed Feb 13, 2013 9:36 pm
- Forum: General Discussion
- Topic: I need some shooters in Texas ...SUN Feb 17th
- Replies: 59
- Views: 5455
Re: I need some shooters in Texas ...SUN Feb 17th
pm sent
Little Doc
Little Doc
- Fri Jan 04, 2013 10:36 pm
- Forum: General Discussion
- Topic: I need some shooters in Texas ...SUN Feb 17th
- Replies: 59
- Views: 5455
Re: I need some shooters in Texas ...
Nearly in Texas. about 85mi from Greenville. Avalibal if I can help. Got some levergun experience. Just let me know.
LD
LD
- Mon Oct 29, 2012 10:01 pm
- Forum: General Discussion
- Topic: Eat Yer Hearts Out!
- Replies: 36
- Views: 3987
Re: Eat Yer Hearts Out!
Nature of the beast, rebounding hammer.
ld
ld
- Sat Oct 27, 2012 9:25 am
- Forum: General Discussion
- Topic: Eat Yer Hearts Out!
- Replies: 36
- Views: 3987
Re: Eat Yer Hearts Out!
Howdy Griff, Long time no see. I have had that same gun for several years. 300grgc from a lee mould with a stiff charge of H110 1550fps. not max. Killed two deer with it. Sounds like you are going to shoot plainsman at comin-at-cha. Gona shoot mine in that match with bp. I sighted mine in to shoot t...
- Wed Jun 13, 2012 7:39 pm
- Forum: General Discussion
- Topic: Marlin 30-30 takes dandy buck
- Replies: 12
- Views: 1627
Re: Marlin 30-30 takes dandy buck
30-30 just might be the most under rated ctg.
- Wed Jun 13, 2012 7:12 pm
- Forum: General Discussion
- Topic: Single Action 40S&W
- Replies: 13
- Views: 2044
Re: Single Action 40S&W
I believe ruger made 38-40 vaqueros with 40 s&w cyl. buddy of mine had a pair.
probably a custom run by some distributor davidson's maybe.
what you suggest would get you there.
m
probably a custom run by some distributor davidson's maybe.
what you suggest would get you there.
m
- Wed Mar 14, 2012 10:20 pm
- Forum: General Discussion
- Topic: permanent Metal Marker
- Replies: 9
- Views: 1421
Re: permanent Metal Marker
i believe Enco has such a marking pen.
- Wed Mar 14, 2012 10:08 pm
- Forum: General Discussion
- Topic: Reloading Berdan Primed Cases
- Replies: 10
- Views: 1954
Re: Reloading Berdan Primed Cases
howdy griff, this was posted on another site or maybe this one. i can't remember or i would refer you to it. quite interesting. i will describe it as i remember. drill the indent in the primer with the proper size drill for a flash hole. (drill all the way thru to make a center flash hole) then dril...
- Fri Dec 30, 2011 10:36 pm
- Forum: General Discussion
- Topic: For Those Who Have A Kindle
- Replies: 8
- Views: 1690
Re: For Those Who Have A Kindle
my puter will not let me see the file. it says there is not a program assocated with it. what should i tell it for a program?
m
oh yea, Happy New Year.
m
oh yea, Happy New Year.
- Sun Dec 11, 2011 8:21 pm
- Forum: General Discussion
- Topic: ***FREE*** Winchester book WINNER Chuck 100 yd
- Replies: 69
- Views: 7541
Re: ***FREE*** Winchester book by R. L. Wilson
please include me in the drawing.
thanks, m
thanks, m
- Thu Aug 11, 2011 10:59 pm
- Forum: General Discussion
- Topic: Aftermarket mystery ladder sight?
- Replies: 5
- Views: 1587
Re: Aftermarket mystery ladder sight?
Smith, Tempe, Az
- Fri Feb 04, 2011 7:19 pm
- Forum: General Discussion
- Topic: Traditional Leverguns Bison Hunt
- Replies: 17
- Views: 3704
Re: Traditional Leverguns Bison Hunt
86er
is this hunt still open. what ya got left. i am close in okla.
m
is this hunt still open. what ya got left. i am close in okla.
m
- Sun Jan 02, 2011 11:14 pm
- Forum: General Discussion
- Topic: Gun show report, now with a photo
- Replies: 22
- Views: 3506
Re: Gun show report, now with a photo
baloon head 45 C cases. what are they worth.?
- Mon Sep 21, 2009 8:32 pm
- Forum: General Discussion
- Topic: 45-70 double
- Replies: 98
- Views: 36574
Re: 45-70 double
a lot of interest here. i check back often to see what Paco has to say. sad to see no info yet. but i have a question. Jim T can you give us an up date on Paco and wife. your last info was in may. i am sure everyone would be interested in their health. unless of course we would be intruding on their...
- Sat May 23, 2009 10:43 pm
- Forum: General Discussion
- Topic: Nice Indian with rifle photo print on eBay.
- Replies: 7
- Views: 1229
Re: Nice Indian with rifle photo print on eBay.
i have a friend who has a remington keen. inherited from his fatherinlaw. 85% finish and a pristeen bore. i have had the privlage to handle it several times and have shot it many times. i have only seen three of these and the other two were junk. a very interesting piece.
ld
ld
- Mon Apr 27, 2009 11:32 pm
- Forum: General Discussion
- Topic: 45-70 double
- Replies: 98
- Views: 36574
Re: 45-70 double
come on Paco give it up. we are all waiting.
- Mon Apr 27, 2009 8:31 pm
- Forum: General Discussion
- Topic: PRICE CHECK - Winchester 94 38-55 chief crazy horse
- Replies: 9
- Views: 3398
PRICE CHECK - Winchester 94 38-55 chief crazy horse
friend has a win 94 cch in 38-55 and wants to sell it but does not know the value. he ask me. i ain't got a clue but thought someone here would know. before you ask here is what i was told. used gun 90-95% blue sone dings in stock with a small chip out of the toe of the stock. tang has been drilled ...
- Wed Apr 08, 2009 8:27 pm
- Forum: General Discussion
- Topic: Adjusting Windage On Fixed Sight Vaquero
- Replies: 31
- Views: 6406
Re: Adjusting Windage On Fixed Sight Vaquero
what jreed said.
ld
ld
- Sun Apr 05, 2009 8:19 pm
- Forum: General Discussion
- Topic: Winchester 38-55 Keyholing
- Replies: 19
- Views: 2311
Re: Winchester 38-55 Keyholing
you may now have a jugged chamber. i have seen that in a 30-30 before many years ago. disassemble the gun and drive the case out with a brass rod. (you will have to releave the extractor from the case to move the bolt) if you are not comfortable with the disassembly take it to a smith and ask that t...
- Sun Apr 05, 2009 8:05 pm
- Forum: General Discussion
- Topic: Need recommendations for a modern 357 Mag Levergun
- Replies: 36
- Views: 3534
Re: Need recommendations for a modern 357 Mag Levergun
kirk d. marlin jam is a mistuned rifle. it can be fixed if there. i think the marlin would be the best. fewer moving parts, may be easily cleaned from the breach. and made as slick as one could want. my vote goes for the marlin 94. i might add i am a 92 fan but for the question you ask i think the m...
- Fri Apr 03, 2009 9:43 pm
- Forum: General Discussion
- Topic: Winchester 38-55 Keyholing
- Replies: 19
- Views: 2311
Re: Winchester 38-55 Keyholing
rusty, just some rambling here. maybe some of it will be of help. i bought a cch in the 1980's. a friend did also. we bought a rcbs mould can't remember the weight but 265 comes to mind. this was a gascheck bullet. bought a 375 sizer die and loaded some rounds. first five rounds were ok but after th...
- Tue Mar 31, 2009 10:09 pm
- Forum: General Discussion
- Topic: OT- S & W M&P identification
- Replies: 5
- Views: 994
Re: OT- S & W M&P identification
history of smith & wesson by roy jinks page 161 states that serial number 146900-241703, dates 1909-1915, model 1905 third change. may be 4 in bbl or 6 in bbl, round butt or square, blue or nickle.
hope this helps
ld
hope this helps
ld
- Fri Mar 13, 2009 10:13 pm
- Forum: General Discussion
- Topic: 4 Weeks, 4 Days & Countin'...
- Replies: 52
- Views: 5309
Re: OT - Day 2 down! Now I could Stand Some Prayers
hang in there griff when i was where you are early 80's. i bought sugarless gum by the large pkg. and when i wanted a chew i got me one. cept it was the gum. all of a sudden about three years down the road i did not want the gum anymore. not had a chew or dip since then. quit smoking in 1980. ain't ...
- Thu Mar 05, 2009 4:28 pm
- Forum: General Discussion
- Topic: Uberti '76 in 45-60
- Replies: 10
- Views: 1106
Re: Uberti '76 in 45-60
howdy kim,
the uberti 76 hands down. you will not be sorry. as a matter of fact you will smile for a while.
i have had mine fdor more than two years and i am still
little doc
the uberti 76 hands down. you will not be sorry. as a matter of fact you will smile for a while.
i have had mine fdor more than two years and i am still
little doc
- Sun Jan 25, 2009 9:07 pm
- Forum: General Discussion
- Topic: Headspace Issue with 1893 Marlin
- Replies: 18
- Views: 2748
Re: Headspace Issue with 1893 Marlin
your boolet needs to match the throat. i once had a 93 in 32-40 that keyholed all boolets at 25 yds. would only put two of five on a one ft square. i increased the boolet size to .325 and all is fine now. copy the loads listed above with the larger boolet and you will probably see good results. this...
- Fri Jan 09, 2009 1:03 am
- Forum: General Discussion
- Topic: SASS Shotgunnin', Levergun
- Replies: 12
- Views: 1337
Re: SASS Shotgunnin', Levergun
Griff,
now you are dreaming outloud.
little doc
now you are dreaming outloud.
little doc
- Sun Jan 04, 2009 9:42 pm
- Forum: General Discussion
- Topic: OT - Tell 'em that you're thinkin' of them
- Replies: 19
- Views: 1767
Re: OT - Tell 'em that you're thinkin' of them
Griff,
Sorry for your loss, Glad for your wonderful memories.
Little Doc
Sorry for your loss, Glad for your wonderful memories.
Little Doc
- Thu Dec 11, 2008 9:47 pm
- Forum: General Discussion
- Topic: 1873 winchester question
- Replies: 3
- Views: 999
Re: 1873 winchester question
howdy griff,
as i recall it had been shortstroked.
ld
as i recall it had been shortstroked.
ld
- Thu Dec 11, 2008 9:04 pm
- Forum: General Discussion
- Topic: 1873 winchester question
- Replies: 3
- Views: 999
1873 winchester question
shot a cas match with a guy who was shooting a uberti 73 in 357. he was shooting 38's. this gun was throwing all brass (fired cases) forward and he was loosing all his brass as it went in front of the firing line. most i have seen throw the brass up or up and back. usually have your hat brim full of...
- Mon Oct 13, 2008 9:02 am
- Forum: General Discussion
- Topic: Attention 45-60 reloaders
- Replies: 5
- Views: 717
Re: Attention 45-60 reloaders
1886 lee had no 45-60 dies when i needed some so i cut down 45-70 dies and they work fine. as far as FCD i ordered one for 45-70 knocked the center out and cut it off the length difference in the two cases. works like a champ. the same thing can be done if you make 38-55 out of 30-30. hope this help...
- Sun Oct 05, 2008 10:31 pm
- Forum: General Discussion
- Topic: WOW, an 1876 ...
- Replies: 13
- Views: 1843
Re: WOW, an 1876 ...
howdy tutt and all yep i said that. heard it all my life. just to make sure i did not inform you wrong i just made a test. 1873 in 45 colt will empty the magz. upside down. 1873 in 357 will not with 38sp. did not have any mags handy. the 1876 in 45-60 will not the ctg is allowed to fall to far down ...
- Sat Oct 04, 2008 9:34 pm
- Forum: General Discussion
- Topic: Uberti 1876 .45-60 shooters please
- Replies: 15
- Views: 2129
Re: Uberti 1876 .45-60 shooters please
hello 1886, i will tell you what i did. hope this is the info you are looking for. i made my 45-60 cases from 45-70 brass. the brand makes no difference. first trim the rim to a thickness of .058 to .060. 45-70 brass that i have measured is .064 to .069. if the headspace on your 76 is correct the 45...
- Fri Oct 03, 2008 9:18 pm
- Forum: General Discussion
- Topic: OT: Walker, Texas Ranger
- Replies: 12
- Views: 2004
Re: OT: Walker, Texas Ranger
NO, but let me tell you a story. sometime about the year 2000 myself and four other folks were on our way to a weekend sass match. we had to travel 175 miles one way to get there. this required us to leave quite early. about half way there we stopped at a mc donalds to get a bite of breakfast. we al...
- Wed Sep 24, 2008 9:04 am
- Forum: General Discussion
- Topic: OT-Browning A-5
- Replies: 3
- Views: 900
Re: OT-Browning A-5
howdy lever bob,
thank for the site, i will pass it on.
ld
thank for the site, i will pass it on.
ld
- Tue Sep 23, 2008 9:22 pm
- Forum: General Discussion
- Topic: OT-Browning A-5
- Replies: 3
- Views: 900
OT-Browning A-5
Visited with a man i have not seen in a spell today as we discussed the price of ammo in the local wallyworld. he ask if knew where he could find a barrell for a browning auto five. that discussion revealed he had stuck a wad in the bbl ;and fired another behind it and the bbl had a BUBBLE (his word...
- Wed Sep 10, 2008 12:56 pm
- Forum: General Discussion
- Topic: NEXT PURCHACE, WHICH WOULD YOU CHOOSE?
- Replies: 26
- Views: 2400
Re: NEXT PURCHACE, WHICH WOULD YOU CHOOSE?
NOW YOU LISTEN TO ME REAL GOOD. YOU GO GET THE 76 RIGHT NOW AND DON'T EVEN LOOK BACK. GET THE PUMP GUN NEXT YEAR. NOW GO GET IT DUN AND STOP WASTING TIME. HURRY I SAID. GET.
LD
LD
- Sun Sep 07, 2008 8:17 pm
- Forum: General Discussion
- Topic: looking for the report of the reconstruction of adobe walls.
- Replies: 30
- Views: 2841
Re: looking for the report of the reconstruction of adobe walls.
WHAT GRIFF SAID
- Tue Sep 02, 2008 10:40 pm
- Forum: General Discussion
- Topic: How far can you shoot with iron sights?
- Replies: 41
- Views: 5699
Re: How far can you shoot with iron sights?
howdy griff yep that yote was a hoot. as was the rest of the tgts. gota do that again. keep the rubber on the road. back to the original question. this has taken several turns and many opinions have surfaced. i think the answer to your original question is this. if you can't see it you can't hit it....
- Sun Aug 31, 2008 9:48 pm
- Forum: General Discussion
- Topic: How far can you shoot with iron sights?
- Replies: 41
- Views: 5699
Re: How far can you shoot with iron sights?
billy dixon shot an indian off a horse at 1538 yds with a buffalo rifle and iron sights in the 1800's. your question leaves a lot to know. gun, caliber, load, light, wind. many factors will affect how far you can shoot with iron sights. i would say this, this will be different with each person, thei...
- Sun Aug 03, 2008 12:00 pm
- Forum: General Discussion
- Topic: 1st Annual Leverguns Billy Dixon Shoot Report
- Replies: 28
- Views: 14719
Re: 1st Annual Leverguns Billy Dixon Shoot Report
tutt, you dun good. that is as good a description of the weekend and could be told. i enjoyed the shoot and geting to know the folks that attended. it is always nice to put a face with a name. everyone i met were great people. there are few places where one can shoot to these ranges. this range and ...
- Fri Jul 18, 2008 3:58 pm
- Forum: General Discussion
- Topic: B. Dixon Ultra Long Range Event Report
- Replies: 37
- Views: 12281
Re: B. Dixon Ultra Long Range Event July 26-27th Update 7/18/08
hey tutt,
where do you roll out your sleeping bag when in hotchkiss??
where do you roll out your sleeping bag when in hotchkiss??