Paco Kelly's Leverguns.com

BobM

I just bought a 32 caliber hone from Brownells myself. I bought one of the Lipseys 3” SP101s in 327, and extraction is sticky with some 327 factory ammo.

BobM

It can tell you which way to go.

BobM

. I'd like a really accurate 300 Blackout - I've shot a couple AR's, a Mini-14, and an Encore 16" carbine in the cartridge, with bullets from 125 to 220 grains, and none have been under 2" at 50 yards. I really thought the Encore breakopen, with a good scope, would be 'sniper-quality', bu...

BobM

I handled one a couple weeks ago, felt handy.

BobM

The city has a leftist mayor and police chief and council and the county a sheriff and prosecutor. The university says that the organization has not registered as a campus organization since 2021, which if I read it right, is required annually.

BobM

The PD I retired from has Mini 30s in the cars for a couple years around the late nineties or early oughts. I bought USA magazines in ten and twenty round capacities and about half of the magazines would work. The guns ran better with American made ammo. The senior instructor at the time was a Vietn...

BobM

Glad you got it. They can be pretty tight. I do some deburring to the inside of the trigger guard and polish the plunger and hole. Helps a bunch. I made a disassembly tool from an old cleaning rod. I just bent the end so that it would push in the plunger. That reminds me, Brownells used to sell a t...

BobM

I got some slip on Merrill’s a year or so ago, very comfortable also. Great for long drives

BobM

My daughter and I met him at an event at Lehmans Hardware in Ohio last year. Great show and tasty food

BobM

I bought a barrel for mine with sights, easier for me to get better hits. Which reminds me, I’ve not had it to the range for a while, need to correct that

BobM

Pretty sure I have that magazine around here somewhere. Mr Emerson wrote a number of great articles for SWAT magazine back then

BobM

Small world, I had a pistol class from the two guys on the end a couple years ago

BobM

My grandpa used to cast bullets for his, I think I still have his molds. He had a No.3 Ruger he’d restocked and altered or replaced the lever so it looked like a smaller No.1. Unfortunately he sold it before I knew he was doing so, I’d like to have bought it. He also has a 221 Fireball on a small Sa...

BobM

Steve in MO wrote: ↑Wed Mar 19, 2025 7:58 pm I've got a partial box of those left. Wish Speer would bring them back.

I thought I read something last year that there was going to be either a new run, or that someone else was going to make some

BobM

Probably my second favorite scene in the movie

BobM

I’ve been doing some part time bailiff work since retiring a few years ago. Last year I was in the judge’s chambers with two young assistant prosecutors. The judge, in his seventies, told them about an Andy Griffith show episode that related to a situation at hand at the time. The youngsters had nev...

BobM

I always thought those 96/22s were pretty nifty looking but unfortunately haven’t had a chance to shoot one

BobM

I’m hoping it comes out in 44 Special.

BobM

My grandpa had a 37 that he had restocked with a laminate stock. I believe he had one of those long Lyman 20x target scopes. I wish I’d known he was selling it back in the mid nineties

BobM

In the late nineties I bought a 9422M and took it to Montana a few times and shot prairie dogs and maybe a few jackrabbits. I like the cartridge quite a bit.

BobM

I dropped my RCBS Uniflow powder measure and cracked the hopper. I called them (probably pre-email days) to order a new hopper. They would not let me pay for it even after I explained it was my fault.

BobM

Sometime in the mid seventies, around the age of ten we visited friends of my parents. I was in another room where I saw Rio Lobo on a small black and white TV, and I was hooked. One of the local channels had the Lone Ranger and other series on after school so I watched them too. Now I get a couple ...

BobM

Nifty. I went to a S&W pistol armorer school hosted at the West Virginia State Police Academy back in the late 90s. I still have my then issued 5906 that my daughter will eventually get. I bought it when we traded them for M&P40s when those came out.

BobM

I used a Bianchi version with 2” snubs or a 3913 9mm back in the 90s sometimes. I then got an Uncle Mikes version that used holsters that slid on.
Lately I’ve been using the Phlster Enigmas which in my opinion, have made the belly bands obsolete.

BobM

In 1989 the Ohio Peace Officer Academy taught skipping buckshot. I went through their shotgun instructor program in 1997, I don’t think they were teaching that by then.

BobM

Favorite handgun cartridge to load is the 357, as it was the one I learned reloading on, with a Lee Loader back in the mid 80s. Least favorite, probably 9mm due to handling the small cases. My favorite rifle round to load was the 221 Fireball. My grandpa had a small Sako action barreled to look like...

BobM

I bought an all steel 640 in 38 Special when they first came out, wish I’d kept it. I traded it for a Ruger SP101 because I thought I needed the magnum.

BobM

Either an M&P9 2.0 Compact (the Glock 19 sized one) or a Shield Plus. One or the other is my daily carry so it’s readily accessible. I retired from a department that issued M&P40s and I was the armorer. First available out of my main safe is an 18” 870 with an Aimpoint and Surefire light, Fe...

BobM

Could be plantar fasciitis, I’ve been dealing with it for a couple months now. Doctor offered an anti inflammatory and a steroid shot but I wanted to try the also recommended stretching. He gave me a boot to wear for thirty minutes a few times a day. So far seems to be helping.

BobM

Last year I picked up a police trade in that had ghost ring sights on a pic rail, an 18” barrel, and REM chokes. I put an Aimpoint on it and took it to a shotgun class. I figure I can use it for deer season (Ohio), screw in a full choke tube for turkey season, and keep the IC tube in it day to day w...

BobM

My favorite is one of the “Me and Joe” stories about Skeeters grandpa’s friend Tap Ramsey.

I showed my daughter what the books were selling for so she would know not to just toss them out down the road.

BobM

piller wrote: ↑Thu Apr 18, 2024 7:41 pm I am only 58. Not yet thinking about old age.

I’ll be 59 next month myself.

BobM

I’ve been holding on to a 2” 64 for my eventual “old man gun”. I bought it years ago for my daughter but she didn’t like it and bought herself a S&W Shield 9mm.

BobM

Mine was holding the ten ring from the bench at 25 yards with Minimags. Velocitors also seem promising but I’ve not shot enough to tell for sure. I also need to work with the magnum cylinder some more.

BobM

I handled one today. I liked the stock fit and the sights, although I’m not sure how rugged the front sight is. I might wait and see if 357 becomes an option.

BobM

I have a Dillon 550 currently set up for 45 ACP and a Redding Turret for rifle rounds. For revolver ammo, I use my grandpa’s CH Tool and Die Pistol Champ H press. It has four die stations and a primer feed. It’s not as fast as the Dillon but I like using it. Grandma gave it to me after grandpa passed.

BobM

I have a 300 BO pistol and a Ruger Ranch. I use Lancer mags for those, and PMAGs and GI mags for my 223s

BobM

I bought a 16 gauge in 1984 or so. Fall semester, I’d break it down into a duffel bag with my clothes and take it to the dorm. One night, we would drive to a friends parents place about a half hour away. They had about a hundred acres we could hunt and I’d leave the gun there and take it home when t...

BobM

I have dots on an AR, a 9mm PCC, a rimfire AR, and my 1187 deer/turkey/home defense shotgun.

BobM

I always liked his writing in the old Gun World magazine

BobM

I keep a set of 10x42 Leupolds in the truck. I have a better pair of 10x42 Leupolds that I take when I know I’m going to use them. I recently bought a pair of Vortex 8x36 I’ve been taking squirrel hunting. They’re lighter and more compact but pretty good optically.

BobM

What was the Tap Ramsey story? I don't recall that one. One of the Me and Joe stories. Tap was a friend of Joe’s grandpa and wore a black hat, my understanding out of the ordinary at the time. He also had a 44 Special and a Remington 410 cane gun Found it, thanks - Me and Joe and the Man in Black. ...

BobM

6DF2EE52-9FA6-4E08-B214-1A7361B4459F.jpeg

Apollo isn’t very interested in squirrels. He’ll chase rabbits but he gets really wound up when he sees a groundhog.

BobM

samsi wrote: ↑Mon Jan 16, 2023 10:38 pm What was the Tap Ramsey story? I don't recall that one.

One of the Me and Joe stories. Tap was a friend of Joe’s grandpa and wore a black hat, my understanding out of the ordinary at the time. He also had a 44 Special and a Remington 410 cane gun

BobM

This one and the Tap Ramsey story are my favorites.

BobM

I bought a couple tins yesterday at a SW Ohio Walmart. I’d not seen any in quite a while

BobM

The best ankle holster used was the Renegade which is now being made by The Wilderness. I currently carry Cor-Bon DPX in my 642 but a lot of switched on people seem to prefer the standard wad cutters for the low recoil and adequate penetration

BobM

Last week I found 22 Magnum ammo and this week 22 Minimags at my local Walmart. I've not seen 22 ammo there for a while. There is a Bass Pro and 3 Cabelas locations within an hour or so drive that have almost always had some 22 in stock for months

BobM

Somewhere in my house there is one of those Boker sets but I can't find it. I bought myself one of the Case Hobos with the amber bone handle but I've not tried to eat with it yet.

BobM

Took me a minute

Search found 213 matches