Paco Kelly's Leverguns.com

GunnyMack

http://hawkbullets.com/masterList.html

GunnyMack

Hey Griff have you checked out Hawk bullets? They make great bullets, they might have what you are looking for!

GunnyMack

Just goes to show that a pay load doesn't need all that much wad.

Poke dead things with a stick- THAT MADE ME LAUGH!!

GunnyMack

Blaine- not for MANY YEARS!!
I took that blue rooster, I figure it's kind of special, new shootin iron, first shot out of it and a blue bird so it's going on the wall.

GunnyMack

There is also a mini slug on the market.
Never used them.

GunnyMack

Death row inmate's lawyers say they'd prefer firing squad over lethal injection http://www.foxnews.com/us/2016/12/15/death-row-inmates-lawyers-say-theyd-prefer-firing-squad-over-lethal-injection.html Seriously!? $33,000 per dose!! What thef&%#! What ever happened to 'an eye for an eye'? They sho...

GunnyMack

From what I hear, this is a discontinued model. Got this one from GB. I was the only person to bid on it! 28" bbls, IC/Mod , I will say that I HAD to work the triggers, 8&1/2-10&1/2 lbs pulls were just way too ugly! I didn't touch the seat surfaces other then to break the corners, what ...

GunnyMack

It's winter- ya need those calories! It's not like you are eating like my buddy, he would order a doz eggs over, stack o hot cakes, triple order of bacon and home fries & toast. Waitress would have a look of disbelief on her face every time. I'd chime in and say yes he is serious. She'd bring al...

GunnyMack

Headspace works the same on anything that spaces from datum. It's from bolt face to datum, deeper bolt will still be the same distance for GO as a shallower bolt. With a bolt that is for arguments sake is .050" deep will have a chamber that is the same .050" shallower chamber. If a .050 bo...

GunnyMack

Griff, I really didn't think those were solid brass, but the few mentions of tang sights being tweaked got my brain working and I was over thinking it. Fine wire also works great for shimming, easier to work with as well. Seriously, I do NOT own a Winchester of any flavor. Why? I dunno... Seems like...

GunnyMack

Looks like annealing issue! That's not a pressure issue in my eyes.
I wouldn't shoot ANYMORE of it! Contact Fiocchi and see what they say/do.

GunnyMack

I loaded a a box of 28's with #6 Hevishot, my intention was to try the 28 on puddle ducks, but since it was a dry fall last year I never used those loads so I have been using it on pheasants. That Hevishot is pure MAGIC! Bird gets up pull the trigger and the bird falls down. I had to buy some 410's ...

GunnyMack

So I'd be on board if it was bacon, or pork roll( essentially spam, for those of you not in the NE) love the corn bread waffle idea!
Mmmm bacon grease....

GunnyMack

Boy oh boy Griff I though my eyes went bad! Gotta love that brass frame! I don't own a Winchester but if I was to buy one it would be a '66! I wonder if all the frames are off from the factory...? Were the brass frames castings? Barrel Threads off center? All the machine work warp the frames? Guess ...

GunnyMack

The x39 head spaces on the datum of shoulder, only issue with a deeper bolt is more of the case head being 'unsupported'. Not an issue as the bolt lock up takes care of that.

I like PSA 9 mm platform because it's Mage to use Glock( or colt or s&w mags{I think} mags. No filler in 223 mag well.

GunnyMack

I have been debating a 9mm Glock pattern lower from PSA. Think it would be fun little carbine.
Only problem is when they have lowers in stock they don't have uppers and vice versa!

GunnyMack

Welcome! You will enjoy the forum.

I hate to say this, on the Classified page a member has a pair of B92's for sale. One of which is a 357.

Curious to see some range reports on you new gun!

GunnyMack

I probably don't have to tell you this but if you decide to re blue the barrels, make sure to Belgian blue them. HOT salt blue could ruin the solder joints.
I love the case color, for its age there is still great color there. Really nice wood too! GREAT FIND!

GunnyMack

WOW Six great cartridge board!

GunnyMack

Six I love your cartridge collection! Think you should give us a breakdown of all the calibers you have. I don't own any Win 94's, but I knew a guy that claimed his grandfather found a 92 in a box canyon. That gun sure was tired looking. Then like a fool he completely refinished it! That was heart b...

GunnyMack

6pt, that is REAL nice! I think the barrels have probably just have the brown worn off. I got my CZ, the LOP is good for me. Wood has good figure, nice case colors too. Took it pheasant hunting yesterday, first time I shot it( been deer hunting). Claro put a blue rooster and the right barrel spoke! ...

GunnyMack

Question:
Does a unicycle seat stick to your butt like a tongue to a flag pole?

GunnyMack

Bon Chance!
Keep the dirty side down!

GunnyMack

How true! I too get a kick out of people that think only a 12 can kill birds. For me even a 20 is a bit over gunned! Biggest thing I see are people being OVER choked. Especially in small gauges. I shoot skeet/mod in my Red Label 28 ga, more then enough choke out to 40+ yards. The 410 has IC/mod. Tha...

GunnyMack

Years ago I shot many ducks with my Hi-Standard 410 , skeet choke! Then I got my first 28 ga, a Remington 11-48. Shot all kinds of birds,clays, bunnies & squirrels with it. When I'm on the clays field I shoot a 12 but hunt with small gauges.
More sporting for sure!

GunnyMack

Took my new CZ out today, Claro- my little huntin buddy did a splendid job as usual!
1st live round out of the gun and I got this Blue Pheasant. Now I gotta find a taxidermist!

GunnyMack

That hammer is HARD!the red blueing always bothers me. If it was mine, I'd polish to 400 grit, then Belgium blue it and polish the sides off...but that is a beaut none the less!

GunnyMack

Blaine I also keep CBs on hand for quiet dispatching but I can remember a possum that was LUCKY once! Shot it right between the eyes with a CB short- it hit the skull and deflected never penetrating it richoeted off. Then I put a couple in the pump house to finish it. If you haven't tried the Agulia...

GunnyMack

Hey Six- was that 50 ACP a single shot or a magazine fed repeater?

GunnyMack

Six, you and I think alike but my feeling is public hanging! You get caught, tried and IF convicted you have 1 hour for you appeal. If guilty a second time then over to town square wher a rope is thrown over a limb and you stretch! Let em swing for a day or so just to let it sink in. Televise it, pu...

GunnyMack

After a Whoops at the press, I thought I had ruined a 41 mag. So here is my 50/41.

GunnyMack

All I know is my Glock mags are FULL of 180 grain BLACK TALONS that I got for a song years ago!

GunnyMack

Personally my AR loves IMR4895, 55,62&77's all shoot well. I tried Benchmark,Varget and a couple others. 4895 had best consistent accuracy. Then CFE223 came out, haven't tried it in 223 but my AR10 and 147-150 grainers LOVES CFE223! Have not tried any Ramshot powders. I tried one of the Reloader...

GunnyMack

http://www.mssblog.com/2016/12/08/nssf- ... ping-suit/

GunnyMack

It probably is but best bet is to contact Browning. If you find their toll free number and call them I'm sure you can pick their brains!

GunnyMack

Very true 6 pt, sometimes it's nice to know that there is something on the shelf that one can buy though. I have 4 AR's, i collected uppers first then when I got tired of swapping I put together a couple more lowers. What I REALLY want is to rebarrel a post64 Win model 70 I have, make it either a cr...

GunnyMack

Thanks, good stuff to study up on!

GunnyMack

I have an Armalite AR10T, I sent Armalite an email this morning asking about a Creedmore upper.
Their reply was we don't see a Creedmore happening. Guess I'll have to do some research, but I don't think Armalite plays well with other makers...

GunnyMack

Hey Griff, you need a few 20mm cans! They hold so much ammo ya can't move em! I have one for the shotgun press, when I was competing I could get 1200+ 12 ga in it. Just enough for a match! I have a 50 cal can full of 40 S&W. 30 cal cans full of all kinds of ammo... One thing I did back in '08 wa...

GunnyMack

For a while now I have been toying with the idea of big bore airguns.
I have seen videos of pig/deer hunts. Are they really that effective?
Anyone here have any experience with big bore air guns?

GunnyMack

Well Six I didn't have to scratch at all! Was a delightful afternoon, saw deer, squirrels & birds, watched a Pilliated woodpecker destroy a fallen sassafras tree in his hungry. I always enjoy the sights when I'm out there. I'm sure that's a big part of why we all get in the woods- to observe the...

GunnyMack

https://www.youtube.com/embed/gQ1D_1A9ds4?rel=0

GunnyMack

So I have an idea Griff- try that mix in other moulds! If more moulds have same issue then you know it's the mix. If not then you have a problem with that specific mould(s).
If it's the mix, pour ingots and sell it off.
Or just use it for plinking ammo and send it down range!

GunnyMack

GO GET EM 7!!!!

GunnyMack

I finally decided to go do my squirrel impression today. Ya know sittin a tree and scratch my nuts.... Anyhow, our deer season has been open since early September and today is the first chance I've had to get out. Around 2:30, 2 fawns and a couple does walked by. Then about 3:30 a 3 point walked by....

GunnyMack

Sure looks like a cold mould.
Griff if you have your wood stove going try warming your moulds by setting them on top. Free heat!

GunnyMack

6pt , I see Midway has your Lapua 6.5 Grendel listed.

GunnyMack

I'm thinking you need to change your handle to
6.5-sika !
I see Weatherby has necked down their 300 to 6.5- that's gotta be a screamer!

GunnyMack

I'll stick with my Bee and Hornet, 410 slugs do a number on felines too!

GunnyMack

Thanks, the upgraded wood was one of the reasons I bought it.
As you said, the finish WAS muddy. A little elbow grease and a fine polishing compound does wonders!

Search found 10045 matches