Ysabel Kid wrote: ↑Sun Feb 01, 2026 9:06 pm That is a very nice group! I thought the .45-60 WCF was pretty restricted on overall length in Winchester 1876's and their clones. Any issues going to a heavier bullet?

With an oal of 2,260“ it repeats perfectly.Brass should be trimmed to 1,840“ for this bullet.

Hi, i tested my new 1876 during 2 days with 300grs plated bullets without having great succes.I switched today to a 420grs bullet (RCBS 405grs GC),alloy 1/2 +2%,.459“,65yards,Ginex LP,Starline brass, 21grs Lovex D060 (5744).10 shots went into 1,1“.Vo 1152fps,SD 8,5 ES 24,6 .The rifle seems to like t...

Bill in Oregon wrote: ↑Sun Feb 01, 2026 9:30 am What everyone else said, plus I love your rear tang sight and Garmin chronograph. Is that a Marble's rear?

Iess,a Marble!

That Kelly is a super sight and it looks great on your rifle. Now you need to swap out the front sight for a Lyman 17A globe sight and you'll be good out to 500 yards and have a top notch NRA Lever Action Silhouette rifle to boot. :D I live in europe,no Silhoutte shooting!😂 I only shoot on paper an...

Is your shooting range enclosed? I see one side is concrete. Those are consistent loads, is one of your numbers SD and the other extreme spread? Iess,the range in enclosed,the shooting line is approx. 150 feet wide. The ES for the first target is 25 and for the second 12.In each 10 shot group i had...

I received today my Kelley sight.Here some pictures:

ywaltzucanrknrl wrote: ↑Thu Jan 29, 2026 4:31 pm Good shooting with a neat rig.

So, you don't clean at all but do you use a blow tube between shots?

The blow tube i use only when there is too much smoke comming out of the chamber.

Hi, i tested today some bp loads with my Unerti 1873,20“,44-40 at 100m (109yards).Testing was made sitting with one support,no intermediate cleaning during 40 shots.Starline brass,Fiocchi LP,LFC,expander .4275“.AM 43-215C, 225grs pure lead,calibrated .430“,emmerts lube with rizinus oil. 1.load,35grs...

I had a bit of a time getting a correct Marble's sight for my Taylor's 1876 a few years ago. I had no trouble getting a Winchester sight, but I couldn't find one with a tall enough staff. I wound up buying an extra tall staff and installing it on the sight myself. Now days Marble's has sights you c...

I will go with a Pedersoli Levergun Creedmore sight.I need to drill one hole for moving forward the sight.

Hi, I tested some loads today with bp swiss No.2 and No.3 and my new casted bullets 43-215c of pure lead at 100m.I tested one duplex load too,5 shots ,at 1,33“!!! 32grs of No.3 and 34grs No.2 were the best loads,velocity was between 1168 and 1214.For the next test i will increase the loads a little ...

jnyork wrote: ↑Sat Jan 17, 2026 11:18 amCall Marbles?

I did,they couldn‘t help!

Hi,
which marble sight will fit the Uberti 1876?The srew set seems to be #995010,but which # for the sight?

Thanks for the infos.I will order the RCBS 45-300 FN,it‘s the only one in stock here in europe and the price is ok.What alloy you will use with a gc?I will use 5744.

Hi,
i am looking for a mold for my new Uberti 1876 in 45-60.Can somebody give me an advice?RCBS 300 or 325,or something else?

Hi, i am a new forum member from europe.I bought my new Uberti 1873 in 44-40 a few weeks ago and i am amazed how accurate this caliber is!My loads at the moment are with plated bullets from Campro,200grs and N340.I ordered the 43-215C accurate mold and i want to shoot my cast bullets with swiss 2 o...

Hi, i am a new forum member from europe.I bought my new Uberti 1873 in 44-40 a few weeks ago and i am amazed how accurate this caliber is!My loads at the moment are with plated bullets from Campro,200grs and N340.I ordered the 43-215C accurate mold and i want to shoot my cast bullets with swiss 2 or...