Paco Kelly's Leverguns.com

Tycer

Those sintered steel frames can be black oxide coated Brownells Oxynate 84 was especially for this. Winchester tried to plate them with iron then blue. And boy that plating was thin, thin, thin! I had one that I just used a little bit of rust remover and it just wiped the plating off. That Brownell...

Tycer

I did upgrade my Blackhawk rear sight to the Bowen NM Field Sight. I never really thought about rear sights fixed vs adjustable. Just whatever came on the sidearm. If adjustable I often upgrade.
Gonna try the blue paint though.

Tycer

[quote=Lastmohecken post_id=1022467 --- i'd rather get that hammer forged barrel threaded than replace it with a possibly inferior one - its my favorite rifle -- and for a semi-auto .22 , freaky accurate -- about .75 MOA for me at my best but .35 with a benchrest buddy who knew what he was doing - ...

Tycer

I never really wanted to deal with all the paperwork, let alone the cost. About the only sbr type thing Id really be interested in is a shoulder stocked SA revolver, and the reporting to travel interstate with it takes some of the wind out of the sails. If suppressors became totally unregulated and...

Tycer

The hard cast flat point would be my choice.
I always wondered about the penetration of Winchester White box flat point fmj.
This guy did the gel test for us on it:
https://youtu.be/EkppVPfFS48?si=DUbnlfnDLqwHq1EL

Tycer

Rimfire McNutjob wrote: ↑Mon Jan 12, 2026 9:33 pm Was this perhaps that period of sintered steel receivers that were iron plated to take the finish?

My guess also.

Tycer

Good points Doc

Tycer

If I were going to buy a BLR I would make sure it’s a shooter and then send it off pronto to have the trigger done.

Tycer

That was, keyword was, a franchise Hampton Inn. Apparently those franchisees are no longer affiliated with Hilton.
https://www.yahoo.com/news/articles/hil ... 41655.html

Tycer

Nice!
Got a text from a buddy who asked if I wanted to buy my 358 BLR takedown back. $200 less than I sold it to him.
Should I?
Sure have missed that girl.

Tycer

360 Dan Wesson is a pretty easy conversion. Max would be a pita.

Tycer

Going through all the available 22 back in 2012 for the new 10/22 takedown. Each diamond is a five shot group with different ammo.
That little bugger will do that bottom left all day with Aguila Gold Eagle Match Rifle. Almost that good with crunchy old Remington Thunderbolt

4221.jpeg

Tycer

Have you checked case volume? There might be a measurable difference between Starline and say Winchester

Tycer

Thanks Doc

Tycer

Hey Doc,
I think this guy has some great points on how to view the younger generation via the Fuentes/Morgan show.
https://open.substack.com/pub/petermcco ... medium=web

Tycer

Lake Speed Jr. has done a couple of videos on filtration with the guys from Donaldson on his The Motor Oil Geek YouTube channel. What you think about filtration is probably wrong. One example given was a mining company swapped their giant diesel engines every 30k hours. By simply changing to a highe...

Tycer

35 whelen ? My guess too. Lots of load data available. As long they’re a couple thou over bore diameter and the barrel is free of constrictions and not bell mouthed (muzzle diameter larger than breech) you can run them well past 1400 fps. If your accuracy gets to what you trust hit a few water jugs...

Tycer

Quit looking at reels! Every time you use AI your electric bill goes up. Now .gov is talking about firing up diesel backup generators to make up for the shortfall. Think diesel is overpriced now? https://www.zerohedge.com/ai/energy-secretary-backup-generators-commercial-sites-could-unlock-35-nuclear...

Tycer

Malamute wrote: ↑Sun Nov 30, 2025 11:50 am Isnt it amazing how many people post without reading the thread?

I read it.
Nice post friend.
Hope you are well.

Tycer

On the Win94 all I needed to do was file the slot in the cartridge guides a bit further to the rear.

Tycer

My favorite is Dr Judy Wood’s work.
The part I can’t un-see is the giant waffle shaped steel outside pieces falling and never hitting the ground. Just turned to dust while falling. Turned into dust.
I don’t need anything more. Someone has the power to disintegrate steel at scale.

Tycer

Glad you’re better Scott. With what I have learned the past four years I have had my share of pharmaceutical “data”. That “data” made my wife suffer three years before taking her life and crushed my retirement plans. Unless I see independent double blind saline placebo testing with five plus year fo...

Tycer

I think an off balance bullet has just as much if not more affect on precision than time of flight. I think John Barsness has written of that in one of his Gun Gack books (excellent reading by the way). This from The Art Of Bullet Casting From Handloader and Rifle magazines, 1966-1981 IMG_1330.jpeg

Tycer

Nice1
Looking forward to the range reports!

Tycer

Excellent. That’s great news!

Tycer

Looking forward to range reports.
Happy for you friend.

Tycer

32-20
118 grain 3118
7.5 grains LilGun
WSP primer

Tycer

I’m with Scott. Pants on carry.

Tycer

Nice find Ted!!

Tycer

Try upping your magnesium. Magnesium glycinate 400 mg.
Theraworx calming spray on the feet at night.
Therablend calming cream.
Denas PCM6 set at 4.3hz just barely noticeable power level.
These are what worked for Nancy.

Tycer

Guys, this is worth the time to watch.
The data breach on the TEA app has national security and corporate legal concerns. Watch S2U hit another home run.
https://youtu.be/bWTyvvb8GFs

Tycer

Yep. Count me in.

Tycer

Grizz wrote: ↑Wed Jul 02, 2025 1:04 am awesome gun and setup. it's a keeper for sure. did you make the case?

^^^This^^^
Pictures of the case?

Tycer

Very nice. That Bee is handsome. Bet it carries well.

Tycer

Nice. Thanks Jay.

Tycer

Hello Folks, I recently joined up here and wanted to introduce myself. The name is Jim and I look forward to taking in the knowledge available here by the rest of you folks. I love lever guns and own a half dozen or so myself. Anyway, that is all. Thanks for having me at the forum. Jim This post is...

Tycer

Excellent. Thank you!

Tycer

Excellent. Thanks!

Tycer

My friend is looking for an estate attorney in Albuquerque. They are concerned that they are being hornswoggled by the co-executor.

Any suggestions guys?

Tycer

I MISS TERRY.

Tycer

Texas requires trailer brakes at 4500 # total trailer weight. I have a trailer that weights 1500# curb weight (tare), it has a brake axle on it but I have not added the sending unit to my vehicle. I prefer to have a trailer brake anytime I get over 2500# especially if it will be at highway speeds. ...

Tycer

IMG_1095.jpeg

Tycer

Amen!

Tycer · Re: Ruger Buckeye 32-20/32 H&R Mag, convertible (Mfg. 1988) IMG_6106.jpeg Mine.

IMG_6106.jpeg

Mine.

Tycer

Bryan Austin wrote: ↑Mon Jun 02, 2025 9:17 am
Rockrat wrote: ↑Mon Jun 02, 2025 8:50 am Thats a pretty hatefull thing to say and really has no business on this site. We are better than that here
Hate? Seriously?

Was I not loud enough?

Bryan. I’m dying to know. Please elaborate!
Not at all insinuating you’re wrong.

Tycer

Thanks guys. Nancy passed last night just before midnight. I tried to sleep next to her for a couple hours, but couldn’t do it. So I got up poured myself a drink and went and sat back on the bed. Shot the pelosi with her. Then had another. Then slept till about eight. Then I got up and I kind of dup...

Tycer

Welcome to the club.

Tycer

Travel well, Nancy Donnelly. Godspeed. Thanks for making our world a better place. Heal well, all that mourn her passing.
I will miss you.
See you on the other side.

Tycer

Thanks Bill.

Tycer

JRD wrote: ↑Wed Apr 16, 2025 1:25 pm
I typed a bunch here and many may not comprehend some details, but I tried to make articulate my point. .

Ya done good. Very well articulated. Thanks!

Search found 6581 matches